How to Clean and Maintain Your Portable Air Conditioner

How to Clean and Maintain Your Portable Air Conditioner

To get optimal results from your portable air conditioner, as well as ensuring your unit works for a long as possible, cleaning and maintenance is required. These simple steps will help you achieve this.

 

Clean the Air Filters

A crucial tip in the upkeep of a portable air conditioner is to always keep maintain the filters. Filters are the heart of the unit and are extremely important to the quality of your cooling experience.

Vacuum out any dirt from below the filter before immersing into warm soapy water in order let it dry completely before putting back inside its housing again. Please note not to force dry the filters. For optimal performance, we recommend that you clean the filters every 2 weeks.

 

...

Drain the Water

Portable air conditioners are intended to remove moisture from the air. Much of that condensation then collects into a container inside the unit, which should be emptied regularly with regular use or maintenance. To drain the water, use the drain plug near the bottom to drain the water. Take out the cap and rubber plug to drain the tank into a shallow tray. Once drained, screw the cap back into its place.

 

...

Keep the Exterior Clean

The portable air conditioner’s casing should be routinely cleaned as it gets dirty and dusty very often. Wipe the surface of the unit clean using a soft cloth dampened with water. Avoid using spray cleaners, chemicals, ammonia, liquids, chlorine bleach, or abrasives to clean it as they may tamper with the surface. A simple solution of warm water and mild detergent works fine. Use another soft dry cloth to remove any moisture from the surface.

. 

...

 

End of Season Storage

Follow these simple steps before storing your portable air conditioner in a dry location away from direct sunlight:

Be sure to drain the leftover water condensate. Remove the lower drain plug and use a shallow pan to collect the water (make sure to replace the drain plug when finished). To dry excess moisture, run the unit in fan-only mode for 12 hours in a warm room to dry it and prevent mould.

Remove the air filter and clean with water. Dry the air filter and then reinstall.

Back to blog

Leave a comment